Welding extruder Leader 2MZ

Extruder Leader 2MZ

Dear customer!

We Express our gratitude to You for purchasing our power tools. The difference from the 2M leader is that electronic brains are built in. There is protection against «Cold start» power wire 3 meters with grounding. Comes in a good case of the production of ITTs-Extradermal. All mechanical components of the device are manufactured to meet the increased requirements for reliability and power reserve. The electronic control unit, specially designed for Leader-2MZ extruders, will provide automatic control and management of all device parameters, and will help you perform the work at a professional level. Delivery throughout Russia and the CIS.

Buy welding extruder Leader-2MZ

Performance Up to 1.5 kg/hour
Filler material Bar
Sheet thickness up to 15 mm
Joint width 3...15mm
Price 85,000 rubles

GENERAL GUIDANCE
When purchasing a product, require checking its performance and completeness.

Please read this manual carefully to ensure proper operation and avoid misunderstandings.

 

General safety rules for working with the extruder.

Attention!

Power tools are high-risk equipment. To avoid injury, fire, or electric shock when using a power tool, THE following basic safety rules must be strictly observed. Read and remember these instructions before using the power tool. Keep the safety instructions in a safe place.

 

SAVE THESE INSTRUCTIONS!

job:

Keep your workplace clean and well-lit. Cluttered, poorly lit workplaces are the cause of injuries.

Do not use the extruder in explosive areas, such as those where flammable liquids, gases, or dust are present. Power tools create sparks that can cause a fire.

Keep children and other people at a safe distance from working power tools.

Do not be distracted – this can cause loss of control during work and cause injury.

 

Electrosecurity.

Before switching on, check whether the power supply voltage of Your extruder corresponds to the mains voltage; check that the cable, plug and socket are working properly.if these parts are faulty, further operation is prohibited.

Use a grounded outlet to connect the extruder.

Avoid body contact with grounded surfaces such as pipes, radiators, stoves, and refrigerators. Electric shock increases dramatically if your body comes into contact with a grounded object. If the use of a power tool in wet areas is unavoidable, the current to the power tool must be supplied through a special interrupter device (RCD) that disconnects the power tool in case of leakage. Electrician’s rubber gloves and special shoes will increase your personal safety.

Do not expose power tools to rain or wet conditions. Water entering the power tool significantly increases the risk of electric shock.

Handle the cord carefully. Never use the cord to carry power tools or pull the plug out of the socket. Keep the cord away from high temperatures, oil liquids, sharp edges, or moving parts. Replace damaged cords immediately.

When using the extruder outdoors, use electrical extension cords specifically designed for this purpose.

 

Personal safety.

Be careful when working with power tools. Do not use a power tool when you are tired or under the influence of medications or drugs that slow down the reaction.

Wear appropriate clothing. Too loose clothing, jewelry, or long loose hair can get caught in moving parts of a working power tool. Keep your hair, clothing, and gloves away from moving parts. Hands should be dry, clean and free of traces of oily substances.

Avoid sudden activation. Make sure that the on/off button is in the «OFF» position before plugging in the power tool.

Use good support and always keep your body balance securely. Proper support and balance allow for reliable control of the power tool in unexpected situations.

Use equipment that ensures your safety. Always wear safety glasses. A respirator, non-slip safety shoes, hard hat or earphones should be used for appropriate conditions.

The extruder must only be serviced by qualified personnel from authorized service centers. Maintenance of the filter element on the hair dryer can be performed independently. Remove the back cover of the hair dryer and blow the filter with air. Perform every 24 hours of work.

When servicing the extruder, use only the recommended replacement consumable parts. The use of non-recommended consumables, attachments, accessories, and welding rods negatively affects the operation of the equipment. The use of certain cleaning agents, such as gasoline, ammonia, etc., can cause damage to plastic parts.

Extruder Leader 2MZ

 

The warranty does not apply to the following cases:

 

The user does not follow the instructions in the operating instructions and does not use the tool for its intended purpose, as well as in case of damage caused by improper storage (corrosion of metal parts);

 

In the presence of mechanical damage to the body, electrical cord, cracks, chips and damage caused by exposure to aggressive media and high temperatures, as well as when foreign bodies enter the vents of the tool;

 

Natural tool wear (full resource depletion, severe internal or external contamination);

 

In case of malfunctions that occurred due to overload that caused the failure of the rotor and stator or other components and parts, as well as due to non-compliance of the power supply parameters with the rated voltage;

 

For fast-wearing parts (carbon brushes, gear belts and wheels, rubber seals, oil seals, protective covers, guide rollers, barrels, etc.), replaceable devices (saws, knives, their fastening elements, cartridges, soles, collets, drills, drills, tires, chains, sprockets, etc.), batteries;

 

If you try to repair and lubricate the tool yourself during the warranty period, as evidenced, for example, by creases on the splined parts of the housing fasteners, damage to the warranty seals;

 

For preventive maintenance of power tools, such as cleaning, washing, and lubrication.

 

ATTENTION! It is forbidden to use the power tool if signs of increased heating, sparking, or extraneous noise are shown. To find out the cause of the problem, the buyer should contact the service center.

 

Products manual welding extruder Leader-2MZ NO. 01560465-033I

Sealed with a seal.

The warranty period of service is 1(One) year if there is a seal.

Manufacturer of products Engineering and technical center (SP Matveev S. V.)

Date of manufacture 07.06.2020

Address: Shchelkovo, ul. Belyaeva 29 St. 1 Tel. 8 (800) 550-06-43; 8 (985) 000-64-65

Instructions 11 (Eleven) sheets.

 

Repairs are not performed without a warranty card. If the ticket is not fully filled in, it is withdrawn by the warranty workshop, and claims on the quality of the product are not accepted.

Recommendations for

Working with the Extruder

Read all the sections carefully and follow the requirements set out in them.

 

Before starting work, check the operation of the extruder.
Install the required attachment and make sure that it is securely and correctly attached;

Check the operation of the extruder by turning it on for 10 seconds.

 

Do not allow dust to enter the ventilation slots of the hair dryer, which may cause it to overheat. Turn off the hair dryer regularly to cool down and remove dust. If a large amount of dust is generated during operation, use dust collectors, and when working in a confined space, use forced ventilation.

 

Power tool warranty terms and conditions

The warranty period of the power tool is 12 months from the date of sale . During the warranty period, the owner has the right to repair the product free of charge for malfunctions resulting from manufacturing defects:

 

Damage caused by the use of low-quality material;

Assembly defects caused by the manufacturer.

Copyright certificate

Экструдеры Патент
Декларация о соответствии Лабораторные Z
Декларация о соответствии РСЭ
Ручные сварочные экструдеры

Extruders

 

To purchase a manual welding extruder

 

Our engineering and technical center produces manual welding extruders for welding plastics.

Manual welding extruders from the ITC-Extruder plant, reliable devices of Russian production.

To view
Инженерно-Технический центр «ЭкструдерМаш»
Модельный ряд РСЭ

A manual extruder is a reliable machine that cooks with pellets or a bar.

Модельный ряд Лидер

Manual extruder «Leader» is a new group of the model range in 2020.

Сварочный пруток

This is the filler material used to form the welding seam.

Насадки для ручных экструдеров

Form the configuration of the seam from the molten mass (extrusion). We have about 20 attachments.

Manufacturer of manual extruders

 

Engineering technical center «Extradermal» engaged in manual welding extruders razrabotkoi (Leader-1, Leader-1, Leader 2, Leader 3, Leader 4, Leader 5, Leader 6, RS-1, RS-1, RS-3, RS-5, RS-6, Ural-1, Ural-2, Ural-Ural I. 3-3P) mower welding of plastics.

ITTs-Extradermal is located in Schelkovo, Moscow region

Доставка экструдеров

Please fill out the feedback form and we will contact you or just call!

We carry out orders for any individual development, please contact us to design any individual project.

ИТЦ-Экструдермаш

Call now


Delivery is carried out throughout Russia and abroad.

Any questions?

You can find out all the details from the head of the company Sergey Matveev by calling:

+7 (499) 955-45-92 or +7 (985) 000-64-65

× Как я могу Вам помочь?